Canon LV-7295 Manuel D'Instructions

6

Rotate the Zoom Ring to zoom in and out.  

Rotate the Focus Ring to adjust the focus of the image.  

If  a  projected  picture  still  has  keystone  distortion  after 

pressing  the AUTO  SET  button  on  the  top  control  or 

the remote control unit, correct the image manually as 

follows:

Press the KEYSTONE button on the remote control unit. 

The  Keystone  dialog  box  appears.  Use  the  Point  ▲▼ 

buttons  to  correct  keystone  distortion.  The  keystone 

adjustment can be stored (pp.38, 40, 48, 50).

Reduce the upper width 

with the Point ▲ button. 

Reduce the lower width 

with the Point ▼ button.  

•The white arrows indicate that there is no 

correction.

•A red arrow indicates the direction of correction.

•An arrow disappears at the maximum 

correction.

•If you press the KEYSTONE button on the 

remote control unit once more while the 

keystone dialog box is being displayed, the 

keystone adjustment will be canceled.

•The adjustable range is limited depending on 

the input signal. 

Auto setup function is provided to automatically execute the setting of Auto setup (includes Auto input, Auto PC and 

Auto Keystone functions) in the setting menu by just pressing the AUTO SET button on the top control or the remote 

control unit. Refer to page 5 for the setting of the Auto setup function.



  • Auto  Keystone  corrects  vertical  distortion 

only; it does not correct horizontal distortion.

  • Auto  Keystone  cannot  work  when  Ceiling 

feature  is  set  to 

On  in  the  Setting  menu 

(pp.38, 40, 48, 50).

  • Perfect  correction  of  the  image  distortion 

cannot  be  ensured  with  the  Auto  setup 

function. If the distortion cannot be corrected 

properly  by  pressing  the AUTO  SET  button, 

adjust manually by pressing the KEYSTONE 

button on the remote control unit or selecting 

Keystone in the Aspect menu (pp.38, 40, 48, 

50).

  • 

Fine sync, Total dots, Horizontal position 

and 

Vertical  position  position  of  some 

computers  cannot  be  fully  adjusted  with 

the  Auto  PC  Adjustment  function.  When 

the  image  is  not  provided  properly  with  this 

operation,  manual  adjustments  are  required 

(pp.33-34).

Zoom Ring

Focus Ring 

OK

POWER

AUTO SET

MENU

LAMP REPLACE

WARNING

VOL

VOL