Canon LV-7295 Manuel D'Instructions

37

Press the MENU button to display the On-Screen 

Menu. Use the Point ▲▼ buttons to select 

Aspect and then press the Point ► or the OK 

button.
Use the Point ▲▼ buttons select the desired 

item and then press the OK button .

This projector has the picture screen resize function, which enables you to customize the image size.

Provide the image to fit the screen size.

Provide  the  image  in  its  original  size.  When  the 

original    image  size  is  larger  or  smaller  than  the 

screen size (104 x 768), the projector enters to the 

panning  mode  automatically. Use the Point ▲▼◄► 

buttons to pan the image. When adjusted, the arrows 

will  turn  red.  When  reached  to  the  correction  limits, 

the arrows will disappear.

Provide the full screen image. 



  • This projector cannot display any resolution 

higher than 190 x 100. If your computer’s 

screen resolution is higher than it, reset the 

resolution to the lower before connecting to 

the projector.

  • The  image  data  in  other  than  104  x  768 

is  modified  to  fit  the  screen  size  in  initial 

mode.

  • 

True  and  Digital  zoom  +/–  are  disabled 

and  cannot  be  displayed  when 

480i,  575i, 

480p 575p, 720p,1035i or 1080i is selected 

in the PC System Menu (p. 31).

  •  When 

True is selected in the Screen menu, 

Digital zoom +/- can not be selected.

Provide the last stored aspect screen image. 

Provide the image at the 16:9 wide screen ratio.

Adjust the screen scale and position manually with 

this function. Press the Point

 

► button at 

Custom 

adj. and the Custom adjustment menu is displayed 

on the screen, you can use the Point ▲▼ buttons to 

choose the item you want to adjust.

 

Scale H/V ..........  Adjust the Horizontal/Vertical 

screen scale.

 

H&V ...................  When set to On, the aspect 

ratio is fixed. The 

Scale V 

appears dimmed and becomes 

unavailable. Adjust 

Scale H, then 

the screen scale is automatically 

modified based on the aspect 

ratio. 

 

Position H/V .....  Adjust the Horizontal/Vertical 

screen position.

 

Common ...........  Save the adjusted scale or 

position to all the inputs. Press the 

OK button at 

Common to display 

a confirmation box. To save the 

scale or position, press the OK 

button at 

Yes. When Custom 

is selected, the saved scale or 

position is used.

 

Reset .................  Reset the all adjusted values. 

Press the OK button at 

Reset to 

display a confirmation box. To 

reset, press the OK button at 

Yes.



  • When no signal is detected, 

Normal is set 

automatically .

  • The adjustable range for 

Scale H/V and 

Position H/V is limited depending on the 

input signal.

Scale the image proportionally to fit the entire screen. 

Either side of image may go over the screen.