Canon LV-7295 Manuel D'Instructions

To the Owner

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE EXCEPT

LAMP REPLACEMENT. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT

DANGEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRESENT

WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

USER'S MANUAL WITH THIS UNIT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Before installing and operating this projector, read

this manual thoroughly.

This projector provides many convenient features

and functions.

Operating the projector properly enables you to

manage those features and maintains it in good

condition for many years to come. Improper

operation may result in not only shortening the

product-life, but also malfunctions, fire hazard, or

other accidents.

If your projector seems to operate improperly,

read this manual again, check operations and

cable connections and try the solutions in the

“Troubleshooting” section on pages 70-7 of this

manual. If the problem still persists, contact the

dealer where you purchased the projector or the

service center.

Safety Precaution

DO NOT SET THE PROjECTOR IN GREASY,

WET, OR SMOKY CONDITIONS SUCH AS IN A

KITCHEN TO PREVENT A BREAKDOWN OR

A DISASTER. IF THE PROjECTOR COMES IN

CONTACT WITH OIL OR CHEMICALS, IT MAY

bECOME DETERIORATED .

READ AND KEEP THIS USER'S MANUAL FOR

LATER USE.

WARNING:
 THIS APPARATUS MUST BE EARTHED.
 TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.
– This projector produces intense light from the

projection lens. Do not stare directly into the

lens, otherwise eye damage could result. Be

especially careful that children do not stare

directly into the beam.

– Install the projector in a proper position.

Improper positioning may reduce the lamp life

and result in severe accident or fire hazard.

– Allowing the proper amount of space on the

top, sides, and rear of the projector cabinet is

critical for proper air circulation and cooling of

the unit. The dimension shown here indicate the

minimum space required.

If the projector is to be built into a compartment

or similarly enclosed, these minimum distances

must be maintained.

– Do not cover the ventilation slot on the projector.

Heat build-up can reduce the service life of your

projector, and can also be dangerous.

– If the projector is unused for an extended time,

unplug the projector from the power outlet.

– Do not project the same image for a long time.

The afterimage may remain on the LCD panels

by the characteristic of panel.

SIDE and TOP

REAR

0.7’(20cm)

1.5’(50cm)

3’(1m)

20cm

50cm

CAUTION

Not for use in a computer room as defined in

the Standard for the Protection of Electronic

Computer/Data Processing Equipment, ANSI/

NFPA 75.

NOTE FOR CUSTOMERS IN THE US

Hg LAMP(S) INSIDE THIS PRODUCT

CONTAIN MERCURY AND MUST BE

RECYCLED OR DISPOSED OF ACCORDING

TO LOCAL, STATE OR FEDERAL LAWS.