Canon LV-7295 Manuel D'Instructions
Computer Input
41
VIDEO Input
Choose
VIDEO or S-VIDEO by pressing the VIDEO
or the S-VIDEO button on the remote control unit.
Before using these buttons, correct input source
should be selected through menu operation as
described below.
1
2
VIDEO
Input Source Selection (VIDEO, S-VIDEO)
Direct Operation
When video input signal is connected to
the VIDEO jack, select
VIDEO.
VIDEO
When the input source is coming
from video equipment connected to
the COMPUTER IN 1/S-VIDEO IN/
COMPONENT IN terminal with a S-
VIDEO-VGA cable, select
S-VIDEO.
S-VIDEO
Note:
When the Auto input function is set to
On 1
or
On 2 in the Auto setup function, the input
signal will be searched automatically (p.5).
Remote control unit
VIDEO button
Press the MENU button to display the On-
Screen Menu. Use the Point ▲▼ buttons to
select
Input and then press the Point ► or the
OK button.
Use the Point ▲▼ buttons to select
VIDEO and
then press the OK button.
S-VIDEO button
VIDEO
S-VIDEO
Use the Point ▲▼ buttons to select
COMPUTER 1.
And then press the Point ► button to access the
submenu items. Use the Point ▲▼ buttons to select
the
S-VIDEO and then press the OK button.
COMPUTER
1
Menu Operation
S-VIDEO
Press the Point ▲▼ buttons to
select
S-VIDEO.