Canon LV-7295 Manuel D'Instructions

75

Check the indicators for projector condition.                                   

• • • green.

• • • red

• • • off

• • • blinks green.



 When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. 

    When this indicator lights yellow, replace the projection lamp with a new one promptly. (pp. 6,68)

The projector is off. (The AC power cord is unplugged.)

The projector is in stand-by mode. Press the POWER button 

to turn on the projector.

POWER

LAMP 

REPLACE

WARNING 



The projector is preparing for stand-by or the projection lamp 

is being cooled down. The projector cannot be turned on 

until cooling is completed and the POWER indicator stops 

blinking.

The temperature inside the projector is abnormally high. The 

projector cannot be turned on. When the projector is cooled 

down enough and the temperature returns to normal, the 

POWER indicator stops blinking and the projector can be 

turned on. (The WARNING indicator keeps blinking.) 

The projector detects an abnormal condition and cannot 

be turned on. Unplug the AC power cord and plug it again 

to turn on the projector. If the projector is turned off again, 

unplug the AC power cord and contact the dealer or the 

service center for service and checkup. Do not leave the 

projector on. It may cause an electric shock or a fire hazard.



The projector is in the Power management mode. 



The projector has been cooled down enough and the 

temperature returns to normal. When turning on the 

projector, the WARNING indicator stops blinking.







The projector is operating normally. 



• • • blinks red.