Canon LV-7295 Manuel D'Instructions

8

Openings in the cabinet are provided for ventilation. 

To ensure reliable operation of the product and to 

protect it from overheating, these openings must not 

be blocked or covered. 

 

Hot air is exhausted from the exhaust vent. When 

using or installing the projector, the following 

precautions should be taken. 

–   Do not put any flammable object or spray can 

near the projector, hot air is exhausted from the 

ventilation holes.

–   Keep the exhaust vent at least 3’ (1 m) away from 

any objects.

–  Do not touch a peripheral part of the exhaust vent, 

especially screws and metallic parts. These areas 

will become hot while the projector is being used.

–  Do not put anything on the cabinet. Objects put on 

the cabinet will not only get damaged but also may 

cause fire hazard by heat.

–  Make sure that there is no object under the 

projector to prevent from covering the bottom 

openings.

Cooling fans are provided to cool down the projector. 

The fans’ running speed is changed according to the 

temperature inside the projector.

When moving the projector, retract the adjustable 

foot to prevent damage to the cabinet and use a 

suitable carrying case.

When this projector is not in use for an extended 

period, put it into a suitable case to protect the 

projector.

Exhaust Vent

(Hot air exhaust)

Do not pitch the projector more 

than 30 degrees from above and 

below.

Do not point the projector up to project 

an image.

Do not point the projector down to 

project an image. 

Do not put the projector on either side 

to project an image. 

Install the projector properly. Improper installation 

may reduce the lamp life and cause a fire hazard.

Do not roll the projector more than 

0 degrees from side to side.

20°

20°

30°

30°

–  Do not drop or bump the projector, otherwise 

damages or malfunctions may result.

–   When carrying the projector, use a suitable 

carrying case.

–  Do not transport the projector by courier or any 

other transport service in an unsuitable transport 

case. This may cause damage to the projector. 

For information about transporting the projector 

by courier or any other transport service, consult 

your dealer.

–  Do not put the projector in a case before the 

projector is cooled enough.

Air Intake Vent

Air Intake Vent (Filter)