Christie Digital Systems 103-012100-01 Manuel D’Utilisation

This projector uses nominal input voltages of 100–120 V or 200–

240 V AC and it automatically selects the correct input voltage. It 

is designed to work with single-phase power systems having a 

grounded neutral conductor. To reduce the risk of electrical shock, 

do not plug into any other type of power system.

If you are not sure of the type of power being supplied, consult 

your authorized dealer or service station.

Connect the projector with all peripheral equipment before turning 

on the projector. 

 

For safety, unplug the AC power cord when the projector is not 

in use. When the projector is connected to an outlet with AC 

power cord, it is in stand-by mode and consumes a little electric 

power.

Connect  the  AC  power  cord  (supplied)  to  the 

projector.

The AC outlet must be near this equipment and 

must be easily accessible.

AC power cord must meet the requirements of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

To POWER CORD 
CONNECTOR on your 
projector.

Ground

To the AC Outlet.
(120 V AC)

To the AC Outlet.