Christie Digital Systems 10000 Fascicule

Mirage

10000

Christie’s Mirage 10000 offers the world’s brightest stereoscopic single-

projector solution for power walls, simulation and entertainment

environments. The Mirage 10000 can provide both active or passive

stereoscopic display at a much lower maintenance cost that typical film or

analog 3D solutions today.

Based on XGA 3-chip DLP™ technology, the Mirage 10000 delivers an

unprecedented 10000 ANSI lumens brightness at 1024 x 768 resolution. 

Unlike 35mm or 70mm projection technology that requires two film

projectors or other stacked analog projectors to achieve 3D effect, the

Mirage 10000 is fully digital and requires only one projector for cost-

efficient high brightness 3D stereoscopic images.

At the heart of the Mirage 10000 are Christie-designed electronics that provide

high bandwidth, frame rates, pixel and clock speeds resulting in the most

advanced digital signal processing for all types of stereo images. This design

employs dark interval adjustments (DIA™) control that enhances the overall

stereo effect by fine-tuning the critical time between left and right fields.

The Mirage 10000 utilizes a 1900W Xenon illumination system specially

designed to display large stereoscopic images. The Intelligent Lens System

(ILS™) provides the ability to recall focus, zoom and positioning settings of

each source input, allowing the projector to display multiple aspect ratios

correctly sized and positioned on the same screen.

Christie’s own advanced optical alignment technique, known as Spatial Light

Imaging Construction (SLIC™) sets a new quality standard that guarantees

optimum focus and convergence accuracy. The Mirage 10000 delivers the

biggest, brightest images – unmatched performance guaranteed.

•

Immersive Environments

•

3D Computer-aided Design

•

Virtual Reality

•

Vis Sim

•

Simulation

•

3D Entertainment