Boxlight XD-10m Manuel D’Utilisation
18
U
s
i
n
g
t
h
e
P
r
o
j
e
c
t
o
r
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
1
Use the up and down arrows to highlight Contrast, press
menu/select
, use the arrows to adjust the contrast, then press
menu/select
to accept your changes.
Tint
NOTE: The color setting applies
to video sources only. The tint
setting applies to NTSC video
sources only.
The tint adjusts the red-green color balance in the projected
image.
image.
1
Use the up and down arrows to highlight Tint, press
menu/select
, use the arrows to adjust the tint, then press
menu/select
to accept your changes.
Color
The color setting adjusts a video image from black and white to
fully saturated color.
fully saturated color.
1
Use the up and down arrows to highlight Color, press
menu/select
, use the arrows to adjust the color, then press
menu/select
to accept your changes.
Blank screen
Blank Screen determines what color is displayed when there is no
active source and when the projector is in standby.
active source and when the projector is in standby.
1
Use the up and down arrows to highlight Blank screen, press
menu/select
, use the arrows to cycle through the options blue,
black, and white, then press
menu/select
to accept your selec-
tion.