Epson T562600 Manuel D’Utilisation

Page de 4
EPSON 
 
 
MSDS # T562600 
Version 3.50 (USA) 
Page 2 of 4 
Release Date 08/05 
4. 
First Aid Measures 
 
4.1 
Eyes: 
Immediately flush with room temperature, low pressure, clean water for at least 15 minutes.  Seek 
medical attention if eye irritation continues. 
 
4.2 
Skin: 
Wash surface areas with soap and water.  Wash soiled clothing before rewearing.  Seek medical 
attention if irritation continues. 
 
4.3 
Inhalation:  Remove subject to ventilated fresh air.  Consult physician if necessary. 
 
4.4 
Ingestion:  Seek medical attention if stomach continues to be upset. 
 
5. 
Fire Fighting Measures 
 
5.1 
Flammability: 
Flash point is greater than 230 deg. F / 110 deg. C (closed cup in accordance with 
ASTM D3278) 
 
5.2 
Extinguishing Media: 
Dry chemical or carbon dioxide 
 
5.3 
Fire Fighting Instructions:  No special fire fighting procedures are required other than breathing apparatus.  No 
special explosion hazards are known. 
 
6. 
Accidental Release Measures 
 
If a spill occurs, use sponges to wipe-up ink, then rinse area with damp cloth.  Place waste in closed container for 
disposal.  Use proper ventilation.  Do not dispose of waste to the sewer.  No eye or skin protection required during 
clean-up.  Wash hands with soap and water. 
 
7. 
Precautions for Safe Handling and Use 
 
Keep out of reach of children and do not drink ink.  Do not store the cartridge in high or freezing temperatures.  Keep 
cartridge out of direct sunlight.  Do not dismantle cartridge.  Do not store cartridges with oxidizing agents or 
explosives.  Make sure cartridge is dry before insertion into printer housing. 
 
8. 
Exposure Controls and Personal Protection 
 
8.1  Engineering Controls: None 
required 
 
8.2  Exposure Controls: None 
required 
 
8.3  Personal Protection: 
None required when cartridges are used as intended 
 
9. 
Physical and Chemical Properties of Ink Formulation 
 
Appearance: 
Magenta Liquid
 
Odor: 
None 
pH: 
9.0 – 10.0 
Boiling point: 
Approximately 212 deg. F / 100 deg. C 
Freezing point: 
Less than 32 deg. F / 0 deg. C 
Melting point: 
Less than 32 deg. F / 0 deg. C 
Flash point: 
Greater than 230 deg. F / 110 deg. C  (closed cup, ASTM D3278)  
Autoflammability: 
None 
Explosive properties: 
None