Siemens 7ML19985AB01 Manuel D’Utilisation
INSTALLATION
Installation shall only be performed by qualified personnel
and in accordance with local governing regulations.
INSTALLING THE OCM-3
The OCM-3 should be mounted in a clean, dry area that is: within the ambient
temperature range and suitable for the specified enclosure. The front cover should be
accessible for programming and viewing.
temperature range and suitable for the specified enclosure. The front cover should be
accessible for programming and viewing.
It is advisable to keep the OCM-3 away from high voltage or current runs, contactors
and SCR control drives.
and SCR control drives.
Do not mount the OCM-3 in direct sunlight without the use of a sun shield.
This product is susceptible to electrostatic shock.
Follow proper grounding procedures.
209 mm
(8.2")
lid screws
(6 places)
(6 places)
106 mm
(4.2")
91 mm
(3.6")
16 mm
(0.6")
285 mm
(11.2")
267 mm
(10.5")
programmer
lid
suitable location for
conduit entrances
mounting holes
(accessed under
lid 4.3 mm (0.17")
dia.,4 places
enclosure
customer mounting
screw
Milltronics reccomends using a punch for making
holes in enclosure. Use suitable cable glands to
maintain ingress rating.
172 mm
(6.8")
OUTLINE AND MOUNTING
Non metallic enclosure does not provide grounding between connections.
Use grounding type bushings and jumpers.
13
OCM III
7ML19985AB01