Siemens MG-2D Manuel D’Utilisation

Page de 24
 
 
Technical Paper 
Communication for the open minded 
Siemens Enterprise Communications 
www.siemens-enterprise.com/open 
 
Issue 1.0 
 
Siemens Enterprise Communications GmbH & Co KG 
Munich, 07/26/2010  
Germany 
 
 
Multi Address Appearance (MAA) 
On OpenStage 

Table des matière des caractéristiques pour Siemens MG-2D

  • Page 1Technical Paper Multi Address Appearance (MAA) On OpenStage Issue 1.0 Siemens Enterprise Communications GmbH & Co KG Munich, 07/26/2010 Germany...
  • Page 2Disclaimer This document contains information on multiple address appearance on OpenStage phone. It raises no claims to completeness. Disambiguation This...
  • Page 3MAA denotes Multiline Appearance with private lines only. MSA denotes Multiline Appearance with shared lines. This document uses MLA as...
  • Page 4Contents Disclaimer 2 Disambiguation 2 Contents 4 Scope 5 Functional Overview 7 Motivation 7 User Experience 8 Basic Representation 8...
  • Page 5Scope This document specifies the Multiple Address Appearance (MAA) interface between an OpenStage SIP phone and a SIP based communication...
  • Page 6 Line 1 Primary appearance Line 2 OpenStage Phone Secondary appearance Line 3 Secondary appearance Figure 2: A phone with...
  • Page 7Functional Overview Motivation A telephone is normally associated with a directory number, or in general, with SIP: an AoR. This...
  • Page 8User Experience MAA is automatically activated if the phone has line keys configured, thus the phone works as MAA phone...
  • Page 9 cLine Presentation Tabs dUser address appearance OpenStage Idle Screen for MAA The idle screen contains the addi- tional line...
  • Page 10Making Calls with Multiple Lines Incoming Call Incoming calls are notified as known from a single user phone. Additional information...
  • Page 11 d. User dials the number. The administrator can configure the phone so that it selects the outgoing line automatically...
  • Page 12 Three-way conference 444<->101<->200 Conference View for 444 User 444 has set up a 3-way con- ference between 444, 101...
  • Page 13User Interface Examples The following examples give an impression about the powerful line/user handling of the OpenStage phone. Line Overview...
  • Page 14Call Options in the Overview Menu Overview Context Menu Overview Context Menu The overview context menu offers a subset of...
  • Page 15User Configuration Items The user can configure the phone behaviour relating to a line and the corresponding overview accord- ing...
  • Page 16Overview Configuration Menu The menu can be reached using the Web Based Management (WBM) or the local user menu at...
  • Page 17Administrative Options The MAA (Multiple Address Appearance) is a subset of the SEN proprietary MLA (Multiple Line Appear- ance). Therefore,...
  • Page 18The Originating line preference parameter determines which line will be used when the user goes off-hook or starts on-hook dialling....
  • Page 19Preselect mode determines the phone’s behaviour when a call is active, and another call is ringing. If the parameter is...
  • Page 20 ¾ Line action mode: Determines the consequence for an established connection when the line key is pressed. Value range:...
  • Page 21Every keyset must necessarily have a line key for the primary line. To configure the key of the primary line,...
  • Page 22 ¾ Ring on/off: Determines whether the line rings on an incoming call. Value range: "On", "Off" Default: "On" ¾...
  • Page 23Limitations When OpenStage is configured as a keyset device with multiple lines, then uaCSTA services can only be applied to...
  • Page 24About Siemens Enterprise Communications: Siemens Enterprise Communications is a premier provider of end-to-end enterprise communications solutions that use ©Siemens Enterprise...