Siemens MG-2D Manuel D’Utilisation

 

00.00.2007    I    17 

 
The MAA (Multiple Address Appearance) is a subset of the SEN proprietary MLA (Multiple Line Appear-
ance). Therefore, some administrative settings are used in both scenarios. The descriptions given here 
are limited to the settings needed for MAA. Any deviating usage of the parameters will enable MLA, 
which is only supported by the SEN OpenScape Voice platform. 
 
There are two sets of options: 
 

¾ 

A general set of options affecting all types of configured line keys. These options are used 
when at least one FPK is configured as (primary) line key. 

¾ 

A set of options per line key. These options specify the behaviour of individual line keys. Thus, 
each line key can have different settings. 

 
 

 
WBM Configuration: 
Admin > System > Features -> Keyset operation 
 

  

General Keyset Options 
The options can be set via WBM, 
WPI und local phone menu.  

 
 
 
The following are common for all keyset lines. The Rollover ring setting will be used when a call is 
active and an incoming call arrives on a different line.  
 

¾ 

no ring: The phone will not ring on the incoming call.  

¾ 

"alert ring": A 3 seconds burst of the configured ring tone is activated on the incoming call. 

¾ 

"alert beep": A beep tone is played on the incoming call, instead of a ring tone. The tone is 
added to the audio of the call, so if a handset is used, the tone will sound from the handset. 

¾ 

"standard ring": The default ring tone is activated on the incoming call. 

 
LED on registration determines whether the line LEDs will be lit for a few seconds if they have been 
registered successfully with the SIP server on phone startup.