OKI 40834406 Fascicule

1. Unpack the tray and remove the 

shipping materials.

2. Turn off the printer and unplug the 

power cord.

3. Remove the interface cable.
4. Note the location of the pins (

1), 

connector (

2) and tray opening (3).

5. Pull down the printer’s manual feed 

tray.

6. Lower the printer onto the auxiliary 

tray, aligning the holes/plug on the 
bottom of the printer on the pins/
connector on the tray. You should 
feel the printer seating and locking 
in place.

7. Attach the connection cable.

8. Reattach the interface cable.
9. Plug in the power cord and turn on 

the printer.

a. Press the Menu button one or 

more times until 

INFO. MENU

 

appears on the display.

b. Press 

 twice.

a. Press the Control Button to take 

the printer off-line.

b. Press and hold down the control 

button for at least 2 seconds, but 
less than 5 seconds. The 
MenuMap prints.

11. Look for TRAY2 on the first page 

of the MenuMap under the 
MEDIA MENU listing. If it isn’t 
there, check to be sure that the 
connection between the printer 
and Tray 2 is secure, then reprint 
and recheck the MenuMap. 

12. Check the MEDIA MENU 

settings shown on the MenuMap 
and make any needed changes for

• TRAY2 PAPERSIZE
• TRAY2 MEDIATYPE
• TRAY2 MEDIAWEIGHT
to match the print media you will 
normally use in Tray 2. (If you need 
help with this, see “Operator 
Panels” in your on-line User’s 
Guide.

1. Pull out the tray.

2. Position the paper guides in the 

tray.

Oki PN-40834406 - 500 Sheet Second Paper Tray