Ultra electronic 300 Manuel D’Utilisation
www.ultramagicard.com
300 & Sprinter dye-film installation guide
To remove the dye-film carrier turn the “Dzus”
fastener ring a quarter turn counter-clockwise,
the dye film carrier can then be removed.
1
Remove the roll of dye film from its wrapper
and slide it over the bottom feed core.
and slide it over the bottom feed core.
Also fit an empty take up roll over the top core.
Important:-
Ensure the two locating notches are facing to
the left on both the top and bottom rolls, as
shown in diagram right>>>.
the left on both the top and bottom rolls, as
shown in diagram right>>>.
2
Notches
Replace the Film Carrier, with the empty take up
spool facing the top.
3