Toshiba B-SX8T Manuel D’Utilisation

 

 

EO13-33002 

3. ON LINE MODE

 

3- 1 

In the ON LINE mode, the following settings can be performed. 

• 

Automatic threshold setting for the Feed Gap Sensor 

• 

Automatic threshold setting for the Black Mark Sensor 

• 

Reset 

• 

Parameter settings (Same as Section 2.2.) 

• 

Printer parameter fine adjustment (Same as Section 2.3.) 

• 

Dump mode 

• 

Expansion mode 

• 

Automatic calibration 

• 

Enabling/disabling the LAN 

• 

Real time clock setting 

 

This section describes the automatic threshold setting for the feed gap sensor/black mark sensor, reset 
operation, dump mode, automatic calibration, LAN setting, and real time clock setting.    The procedures of 
the parameter setting and printer parameter fine adjustment are described in Section 2.2 and Section 2.3 
respectively. 

<1>RESET 

<2>PARAMETER SET 

<3>ADJUST SET 

<4>DUMP MODE 

<5>EXPAND MODE 

ON LINE 

PAUSE 

Hold down [RESTART] key for 3 sec. 

<6>AUTO CALIB. 

<7>LAN 

[FEED] or [RESTART] 

TRANSMISSIVE 

REFLECTIVE 

Hold down [PAUSE] 
key for 3 sec. 

Reset operation menu 

Parameter setting menu (Refer to Section 2.2.) 

Printer Parameter fine adjustment menu (Refer to Section 2.3.)

Dump mode menu

BASIC expansion menu 

Automatic calibration setting menu 

LAN enable/disable setting menu 

Automatic threshold setting 
for the feed gap sensor 
 
Automatic threshold setting 
for the black mark sensor 

<8>RTC SET 

Real Time Clock setting menu