Toshiba B-SX8T Manuel D’Utilisation

 

 

EO13-33002 

(Revision Date: Jul. 24, 2008) 

3.3 Dump Mode

 

3- 6 

In dump mode, data in the receive buffer are printed.    Data are expressed in hexadecimal values.    This 
operation allows the user to verify programming commands or debug the program.   
 

„

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

<1>RESET 
 

ON LINE 
B-SX8T                Vx.x 

Press and hold the [RESTART]
key for 3 seconds or longer. 

PAUSE                    52 
B-SX8T                Vx.x 

Press the [FEED] key until 

<4>DUMP MODE is displayed. 

Press the [PAUSE] key to stop printing. 

 
The number of remaining print count   
NOTE: When the [PAUSE] key is pressed during printing, the number of

<4>DUMP MODE 

<4>DUMP MODE 
BUFFER RS-232C 

Press the [PAUSE] key to enter the dump mode. 
 
Choose a receive buffer to be dumped using the [FEED] or [RESTART]
key. 

• RS-232C: 

RS-232C receive buffer 

• CENTRO: 

Centronics receive buffer 

• NETWORK:  Network interface receive buffer 
• BASIC 1: 

BASIC interpreter (Interface 

→ Interpreter buffer) 

• BASIC 2: 

BASIC interpreter (Interpreter 

→ Printer buffer) 

• USB: 

USB receive buffer 

• RF-ID: 

RFID receive buffer 

 
Choose a printing method using the [FEED] or [RESTART] key.   

• 

ON DEMAND:  Prints 166 lines of data (approx. 50cm), then stops.

 

* To print the subsequent data, choose a printing method 

again and press the [PAUSE] key.  

• 

ALL: 

Prints all data in the receive buffer, then stops. 

 
The printer starts printing data in the receive buffer. 
 
 
After all data has been printed, the display returns to <4>DUMP MODE. 

<4>DUMP MODE 
PRINT  ON DEMAND 

<4>DUMP MODE 
NOW PRINTING… 

[FEED] or [RESTART] 

[FEED] or [RESTART] 

<4>DUMP MODE 
 

Turn the power off, and then on. 

ON LINE 
B-SX8T                Vx.x 

*