Toshiba 3511 Manuel D’Utilisation

November 2003  ©  TOSHIBA TEC

3 - 89

e-STUDIO3511/4511 ADJUSTMENT

To make a key copy counter available, the following 2 components must be installed to the equipment.

Counter socket

MU-10

Key copy counter

MU-8

<Installation procedure>

(1)

Take off the right upper cover.

(2)

Open the bypass tray, ADU, jam access

cover and fuser unit cover. Take off the IH

terminal cover.

(3)

Take off the right rear cover, and cut open

the window for the key copy counter.

(4)

Pull out the harness connector from the hole

of the machine frame, and cut the short

harness of the connector. (Treat the cut

harness properly to avoid it causing a short

circuit with the machine frame.) Then,

disconnect the dummy connector.

Right upper cover

Right rear cover

Dummy connector

Harness connector

IH terminal
cover

04/09