Toshiba 230L Manuel D’Utilisation
176
Printing Guide — Installing Client Software for Macintosh
Multi-Position Stapler and Hole Punch — Select this when the Multi-staple
Finisher or Saddle-stitch Finisher and Hole Punch unit are installed.
Job Separator — Select this when the Job Separator (only for e-STUDIO450
Series and e-STUDIO280 Series) is installed.
Offset Tray — Select this when the Offset Tray (only for e-STUDIO450 Series
and e-STUDIO280 Series) is installed.
Finisher or Saddle-stitch Finisher and Hole Punch unit are installed.
Job Separator — Select this when the Job Separator (only for e-STUDIO450
Series and e-STUDIO280 Series) is installed.
Offset Tray — Select this when the Offset Tray (only for e-STUDIO450 Series
and e-STUDIO280 Series) is installed.
NOTE:
•
When you select “Multi-Position Stapler” or “Multi-Position Stapler and Hole Punch”,
the saddle-stitching function will be selectable for printing. However, saddle-stitch-
ing is available only when the Saddle-stitch Finisher is installed.
the saddle-stitching function will be selectable for printing. However, saddle-stitch-
ing is available only when the Saddle-stitch Finisher is installed.
— Lower Drawer (only for e-STUDIO280 Series)
Not Installed — Select this when the Lower Drawer is not installed.
Installed — Select this when the Lower Drawer is installed.
— Pedestal
Not Installed — Select this when no pedestal is installed.
Pedestal 1 — Select this when the Paper Feed Pedestal is installed.
Pedestal 2 — Select this when the Paper Feed Pedestal and Drawer Module are
installed.
LCF — Select this when the Large Capacity Feeder is installed.
— ADU (only for e-STUDIO280 Series)
Not Installed — Select this when the ADU is not installed.
Installed — Select this when the ADU is installed.
Not Installed — Select this when the Lower Drawer is not installed.
Installed — Select this when the Lower Drawer is installed.
— Pedestal
Not Installed — Select this when no pedestal is installed.
Pedestal 1 — Select this when the Paper Feed Pedestal is installed.
Pedestal 2 — Select this when the Paper Feed Pedestal and Drawer Module are
installed.
LCF — Select this when the Large Capacity Feeder is installed.
— ADU (only for e-STUDIO280 Series)
Not Installed — Select this when the ADU is not installed.
Installed — Select this when the ADU is installed.
5.
Close the Chooser Dialog box.
• The Printer icon is created on the desktop.
Installing the Printer on Mac OS X 10.2.4 or later
Install and configure the printer by the following steps:
Installing the Macintosh PPD File
This equipment supports printing from Mac OS X 10.2.4 or later.
Copying the PPD file to Mac OS X
1.
Insert the Client1 CD-ROM into the CD-ROM drive and open
your language folder in the “MacPPD” folder.
your language folder in the “MacPPD” folder.
2.
Copy the GZ file (.gz) to the desktop, and extract the Macin-
tosh PPD file.
tosh PPD file.
• The GZ file varies depending on the equipment.
TOSHIBA_e-STUDIO4511Series.gz (for e-STUDIO4511 Series)