Toshiba 230L Manuel D’Utilisation

Printing Guide — Printing from UNIX

311

If this option is not specified, the printer’s default value will be used.
Example: The command to staple in the upper left corner of a long edge feed portrait page is 
“lp –o staple=1 filename”.
The value for the stapling position depends on the paper size, the paper feed direction, and the
print direction. This function is not available for all paper sizes and the users should refer to the
copier manual for a list of compatible paper sizes. In particular, A5, A6 and statement paper
sizes will not work with this function.

The output bin can be specified using the following options.

staple=2

Put two staples on the left side of a portrait page or the top side 
of a landscape page printed on long-edge-feed paper. This com-
mand has no affect when the paper is fed from the short-edge 
side.

staple=3

Staple in the bottom left corner of a portrait page and the upper 
left corner of a landscape page.

staple=4

Staple in the top right corner of a portrait page and the bottom 
right corner of a landscape page.

staple=5

Put 2 staples on the right side of a portrait page or the bottom 
side of a landscape page printed on long-edge-feed paper. This 
command has no affect when the paper is fed from the 
short-edge side.

staple=6

Staple in the bottom right corner of a portrait page and the lower 
left corner of a landscape page.

staple=7

Put 2 staples on the top side of a portrait page or the right side of 
a landscape page printed on short-edge-feed large format (A3/
Ledger) paper. This command has no affect when the paper is 
fed from the long-edge side or small paper size.

staple=8

Put 2 staples on the bottom side of a portrait page or the left side 
of a landscape page printed on short-edge-feed large format 
(A3/Ledger) paper. This command has no affect when the paper 
is fed from the long-edge side or small paper size.

staple=9

Put 2 staples in the middle of a landscape page and fold the 
paper in half vertically along the staple line (saddle stitching). 
This command works in conjunction with booklet printing. This 
command has no affect when the paper is fed from the 
long-edge side.

inner

Select the inner output tray.

bin1

Select the upper output tray of the finisher.

bin2

Select the lower output tray of the finisher.

jsp1

Select the upper output tray of the Job Separator.

jsp2

Select the lower output tray of the Job Separator.