Toshiba AS/400 Manuel D’Utilisation
14
AS/400 Print Solution — Installation
Installation
Installation procedure
Install the AS/400 printing solution in two steps:
1. Set up the hardware
2. Set up the AS/400 printer
1. Set up the hardware
2. Set up the AS/400 printer
Step 1: Set up the hardware
NOTE:
•
The controller can be directly connected to the AS/400 network at the same time.
Thus, PCL-based or raw print jobs can be sent to it via the network, bypassing the
AXIS 5570e Print Server device.
Thus, PCL-based or raw print jobs can be sent to it via the network, bypassing the
AXIS 5570e Print Server device.
1.
Following the product installation instructions that came with
the AXIS 5570e Print Server, setup this device.
the AXIS 5570e Print Server, setup this device.
2.
Connect the AXIS 5570e Print Server and your equipment
using the USB cable.
using the USB cable.
3.
Press the TEST button on the AXIS 5570e Print Server to print
a test page to your equipment.
a test page to your equipment.
4.
Connect the AXIS 5570e Print Server to the network hub.