Canon iPF8400SE Manuel D’Utilisation
Color Adjustment
Color Adjustment
You can set the color adjustment.
Adjusting Color
Normally colors should be adjusted in the software application, but if you see colors in the printout that do not
match colors on the screen, you can perform color adjustments.
match colors on the screen, you can perform color adjustments.
1
Select Color on Color Mode in the Color Settings panel.
2
Select Color Adjustment.
3
Drag each slider to the left or right to adjust.
Setting
Details
Cyan
Adjusts the strength of colors to compensate the hues.
Magenta
Adjusts the strength of colors to compensate the hues.
Yellow
Adjusts the strength of colors to compensate the hues.
Brightness
Adjusts the brightness of the entire image. When the results of the printout are brighter
than the original images such as the original photo before scanning and graphics cre-
ated on the display, or when you want to print in different degrees of brightness, use this
feature.
than the original images such as the original photo before scanning and graphics cre-
ated on the display, or when you want to print in different degrees of brightness, use this
feature.
Contrast
Adjusts the relative brightness between the brightest and darkest portions of the image.
*For soft gradation, decrease the contrast. For hard gradation, increase the contrast.
Saturation
Adjusts the hues for vivid color or dark color.
Gray Tone
Adjusts gray from cool black (bluish tones) to warm black (reddish tones).
Note
•
You can also click the up or down arrow, or enter the number directly to increase or decrease the value.
Color Adjustment
iPF8400SE
Mac OS Software
Preview
276