Canon iPF8400SE Manuel D’Utilisation

Adjusting the feed amount

Adjusting the feed amount

If printed documents are affected by the following problems, try adjusting the feed amount.

Banding in different colors

Line length is not accurate in the direction paper is fed

To adjust the feed amount, do the following, in this order.

Depending on the issue, adjust Adj. Priority to suit the particular type of paper.
 (See "Selecting a Feed Amount Adjustment Method.")

Execute Adj. Quality or Adjust Length, depending on the selection in Adj. Priority.
 (See "Automatic Banding Adjustment.")

After executing Adj. Quality, execute Adj. Fine Feed for further adjustment as needed.
 (See "Fine-Tuning the Paper Feed Amount.")

There are two methods of adjusting the paper feed amount, Print Quality and Print Length, either of which will be
applied during printing.
Since the method that is applied during printing is determined from the value of the Adj. Priority setting, configure
the Adj. Priority to match the print target.

Print Quality: Adjusts the feed amount to reduce banding across the sheet in printed documents.
Adj. Quality settings are applied. When Adj. Fine Feed is executed, the Adj. Fine Feed settings are applied
in addition to the Adj. Quality settings.

Print Length: Adjusts the feed amount for better accuracy of lines in printed documents.
The settings of A:High or B:Standard/Draft in Adjust Length are applied.

Automatic: Print Quality or Print Length is selected, depending on Print Priority as selected in the printer
driver at the time of printing.

Note

Either A:High or B:Standard/Draft in the Adjust Length menu is applied, depending on printer driver settings at
the time of printing.

Follow these steps to configure the settings.

Load the paper.

Adjusting the Feed Amount

                                                                                                                                                                      

iPF8400SE

                                                                                                                                                                                                                     

Adjustments for Better Print Quality

Adjusting the feed amount

 

526