Canon iPF8400SE Manuel D’Utilisation

Cause

Corrective Action

However, the roll paper may run out during
the print job and you may not be able to print
all of the document.

Press ▲ or ▼ to select Change Paper, and
then press the OK button.
Change the Paper Source of the printer driv-
er, or replace the roll with a roll that has
enough paper for the print job, and then print.
 (See "Removing the Roll from the Print-
er.")

Press ▲ or ▼ and select Stop Printing or
press the Stop button to stop printing.

Cause

Corrective Action

Paper that is too large for the printer has been loa-
ded.

Lift the Release Lever and load paper of the correct size.
 (See "Paper Sizes.")

Paper that is too small for the printer has been
loaded.

Lift the Release Lever and load paper of the correct size.
 (See "Paper Sizes.")

Paper has been loaded that is too small to print
the test pattern for printhead adjustment or nozzle
checking.

Lift the Release Lever and load unused paper A4/Letter (vertical) or larger.
More than one sheet may be required depending on the adjustment.

Cause

Corrective Action

You have attempted to print on a roll, but
no roll is loaded.

Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button. Load the roll,
and then print.
 (See "Loading Rolls on the Roll Holder.")

Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.

Cause

Corrective Action

A print job for rolls was received when a
sheet is loaded.

Follow these steps to load and print on a roll.

Press ▲ or ▼ to select Eject Paper, press the OK button, and remove the sheet.
 (See "Removing Sheets.")

Load a new roll.
 (See "Loading Rolls in the Printer.")

The printer now starts printing the print job.

Press ▲ or ▼ to select Stop Printing, and then press the OK button.

Cause

Corrective Action

The roll is empty.

Follow these steps to replace the used roll with a new roll of the same type and size.

Lift the Release Lever and remove the roll.
 (See "Removing the Roll from the Printer.")

Load the new roll.
 (See "Loading Rolls on the Roll Holder.")

iPF8400SE

                                                                                                                                  

This paper cannot be used as size is not supported.

                                                                                                                                                                                                                     

Error Message

Messages regarding paper

615