Canon iPF825 Manuel D’Utilisation
Important
• Use Netscape Navigator 6.0 or later, Internet Explorer 5.01 or later, or Firefox 1.5 or later as a web browser.
In Mac OS X, you can also use Safari 1.32 or later or Safari 2.03 or later.
• Access is not possible via a proxy server. In environments where a proxy server is used, add the printer's IP
address to Exceptions (addresses accessed without a proxy server) in the web browser proxy server settings.
(Settings may vary depending on the network environment.)
(Settings may vary depending on the network environment.)
• Enable JavaScript and cookies in the web browser.
• If you access RemoteUI with the printer name instead of its IP address, make sure the DNS settings are cor-
• If you access RemoteUI with the printer name instead of its IP address, make sure the DNS settings are cor-
rectly configured.
Configuring the Printer's TCP/IP Network Settings
Follow the steps below to configure the TCP/IP network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the TCP/IP group to display the Edit TCP/IP Protocol Settings page.
6.
Refer to the TCP/IP Settings Items table to complete the settings.
TCP/IP Settings Items
Item
Details
Default Setting
Use DHCP
Activate this setting to use DHCP for configuring the IP address.
Off
Use BOOTP
Activate this setting to use BOOTP for configuring the IP address.
Off
Use RARP
Activate this setting to use RARP for configuring the IP address.
Off
Enable DNS Dy-
namic Update
namic Update
Activate this setting to perform DNS server registration automati-
cally.
cally.
Off
Use Zeroconf
Function
Function
Activate this setting to use Bonjour.
On
IP Address
Specify the printer's IP address.
0.0.0.0
Subnet Mask
Specify the printer's subnet mask.
0.0.0.0
Gateway Address
Specify the printer's default gateway.
0.0.0.0
LPD Printing
Activate this setting to use LDP Printing.
On
IPP Printing
Activate this setting to use IPP Printing.
On
IPP Printer URI
Specify the URI of the printer used for IPP printing using up to
252 characters.
252 characters.
printer
Network Setting
>
Network Setting
>
iPF825
Configuring the Printer's TCP/IP Network Settings
10
773