Canon iPF825 Manuel D’Utilisation

Cause

Corrective Action

Color may change slightly even on the same mod-
el of printer if you use a different version of the
firmware or printer driver, or when you print un-
der different settings or in a different printing en-
vironment.

Follow these steps to prepare the printing environment.

Use the same version of firmware or printer driver.

Specify the same value for all settings items.

Cause

Corrective Action

The paper feed amount is out of ad-
justment.

Adjust the feed amount.

Printing does not proceed smoothly
because print jobs are interrupted
during transmission.

Exit other applications and cancel other print jobs.

In the printer menu, Print Length is
specified in Feed Priority.

Selecting Band Joint may improve printing results.
Adjust the feed amount in the printer menu by specifying Band Joint in Feed
Priority and try printing again.

The Printhead is out of alignment.

Adjust the Printhead alignment.

The Printhead nozzles are clogged.

Print a test pattern to check the nozzles and see if they are clogged.

Streaks may occur if you set the
Print Quality too low.

Choose a higher level of Print Quality in the Advanced Settings of the printer
driver and try printing again.
Printing in Draft or Standard mode is faster and consumes less ink than in
Highest or High modes, but the printing quality is lower.

The type of paper specified in the
printer driver does not match the
type loaded in the printer.

Load paper of the same type as you have specified in the printer driver.

Make sure the same type of paper is specified in the printer driver as you have
loaded in the printer.

Hold down the Stop button for a second or more to cancel printing.

Change the type of paper in the printer driver and try printing again.

Cause

Corrective Action

Line Drawing/Text is selected
when printing images in many solid
colors.

Specify Image in the printer driver.

Troubleshooting 

 Problems with the printing quality 

iPF825

Banding in different colors occurs