Canon iPF825 Manuel D’Utilisation

Cause

Corrective Action

The Cutter Unit stops in
the middle of cutting.

In other cases, the Cutter
Unit may be damaged.

Contact your Canon dealer for assistance.

Cause

Corrective Action

You are pressing the ▲ button on the Control Panel and trying to rewind the roll to the edge.

Release the ▲ button.

Cause

Corrective Action

The Release Lever is up.

Lower the Release Lever.

If the error occurs again, turn off the printer and wait a while before restoring power.

"Lift release lever and reload the paper."

Cause

Corrective Action

Because paper expands or con-
tracts depending on the environ-
ment of use, it may become nar-
rower or wider than the suppor-
ted width for borderless printing.

Hold down the Stop button for a second or more to cancel printing.
Use each type of paper only where the recommended environmental conditions are
met. For details on environmental conditions for various paper, see the Paper Ref-
erence Guide.

The paper is loaded askew.

Lift the Release Lever and straighten the paper so that the edge of the paper is in
the width of the ink groove for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.

If you press the Online button and continue printing, the document will be printed
with a border.

"Check supported paper."

Cause

Corrective Action

The print job received specifies a type
or width of paper that is not compatible
with borderless printing.

Follow these steps to change the settings of the print job to enable border-
less printing.

Hold down the Stop button for a second or more to cancel printing.

Make  sure  the  correct  printer  driver  for  the  printer  is  selected  and  try
printing again.
For  information  on  types  of  paper  compatible  with  borderless  printing,
refer to the Paper Reference Guide.

Error Message 

 Messages regarding paper 

End of paper feed.

iPF825