Citizen Systems CBM-270 Manuel D’Utilisation

CBM-270 User’s Manual

[Code]

<1D>H<3C>H

[Outline]

This command initializes the printer mechanism.

[Caution]

This command is valid only when the label printer is selected with DS1-5.  Since it uses one

label for scanning, a head search starts from the next label.  The maximum label length and

label spacing (Black mark) is 300 mm.  Any label exceeding this limit results in an error.

GS  A  m  n

(Only When Label Printer is Selected)

[Function]

Correctting the label top position

[Code]

<1D>H<41>H<m><n>

[Range]

0 

≤

 m 

≤

 255, 0 

≤

 n 

≤

 10

[Outline]

This command sets the label head search position in terms of correction value for the default

position.  m denotes the correcting direction and valid only for the least significant bit (m0).

m 0

Correcting direction

0

Corrects in the forward direction

1

Corrects in the reverse direction

n denotes a correction value; it is set in increments of n/203 inch.

[Caution]

This command is valid only when the label printer is selected with DS1-5.  The correction

value remains valid until it is re-set with this command or the power is turned on again.  Any

setting beyond the range is ignored.