Citizen Systems BD2-2220 Manuel D’Utilisation

 

- 35 - 

 

 

Printing and feeding paper in minimum pitch

 

 

 

<

1B>H<4A>H<n> 

 

[Range] 

0≦n≦255 

 

 

 

Prints the data held in the print buffer and feeds paper by [n×basic calculation pitch] inches.

 

 

 

• After this command is executed, the beginning of the line is taken as the start position for the next   

print. 

• The line feed width can be set separately for the STANDARD and PAGE MODES. 
• This command does not affect the line feed width defined by ESC 2 or ESC 3. 
• The basic calculation pitch is set by GS P. 
• Fractions resulting from calculation are corrected with the minimum pitch of the mechanism, and 

the remainder is omitted. 

• In STANDARD MODE, this command uses the vertical (paper feed direction) basic calculation pitch 

(y). 

• In PAGE MODE, this command acts differently depending on the start point: 

(1) If the start point specified by ESC T is top left or bottom right, the command uses the vertical 

(Paper feed direction) basic calculation pitch (y). 

(2) If the start point specified by ESC T is top right or bottom left, the command uses the 

horizontal (Perpendicular to the paper feed direction) basic calculation pitch (x). 

• The maximum settable line feed width is 1016 mm (40 inches). A setting greater than this 

maximum is trimmed to the maximum. 

 

The initial value is not defined.