Xerox N2025 Manuel D’Utilisation
Using the Menu System
1-62
❖
System Administrator Guide
Table 1.21 USB Menu Functions
Menu Item and Function
Keystrokes
Display
Port Enable
Enable or disable the USB port.
The available values are:
On*
Off
Off
For the new setting to take effect,
you must restart the printer
either by invoking the Print
menu’s Restart Printer item (see
page 1-102) or by powering the
printer off and on.
either by invoking the Print
menu’s Restart Printer item (see
page 1-102) or by powering the
printer off and on.
1. Press Menu Up or Menu
Down until you see:
Menus
USB Menu
2. Press Item Up or Item Down
until you see:
USB Menu
Port Enable
3. Press Value Up or Value Down
until you see:
Port Enable
=
New Value
4. Press Enter. You will see:
USB Menu
Port Enable
5. Press Online. You will see:
Ready
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
5 - 300 seconds (30*)
This item also causes an implicit job
end such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., formfeed, reset, etc.).
end such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., formfeed, reset, etc.).
The time changes incrementally by 1
second each time either Value Up or
Value Down is pressed. Holding
down Value Up or Value Down
causes continuous scrolling through
the values.
second each time either Value Up or
Value Down is pressed. Holding
down Value Up or Value Down
causes continuous scrolling through
the values.
1. Press Menu Up or Menu
Down until you see:
Menus
USB Menu
2. Press Item Up or Item Down
until you see:
USB Menu
Port Timeout
3. Press Value Up or Value Down
until you see:
Port Timeout
=
New Value
4. Press Enter. You will see:
USB Menu
Port Timeout
5. Press Online. You will see:
Ready
Table 1.21 Page 1 of 2