Xerox 5230 Manuel D’Utilisation
3 Copy
46
Document Feeder
The following explains how to load documents using the document feeder.
The maximum capacity of the document feeder is shown below:
The maximum capacity of the document feeder is shown below:
Documents can be any size from 139.7 to 297 mm (4.9 to 11.7 inches) for the width
and 210 to 432 mm (4.5 to 17 inches) for the length, and the standard sizes of 5.5 x
8.5” SEF/LEF to 7.25 x 10.5” SEF/LEF. Make sure that documents are in good
condition, and remove all staples or paper clips before loading.
NOTE: To reduce the risk of document feeder jams, use the document glass to copy
folded or creased documents.
and 210 to 432 mm (4.5 to 17 inches) for the length, and the standard sizes of 5.5 x
8.5” SEF/LEF to 7.25 x 10.5” SEF/LEF. Make sure that documents are in good
condition, and remove all staples or paper clips before loading.
NOTE: To reduce the risk of document feeder jams, use the document glass to copy
folded or creased documents.
NOTE: A paper jam may occur when custom sized originals are loaded in the
document feeder and the original size feature is set to [Auto Detect]. In this case,
entering a custom paper size is recommended. For more information, refer to
document feeder and the original size feature is set to [Auto Detect]. In this case,
entering a custom paper size is recommended. For more information, refer to
The machine is capable of sequentially scanning mixed size documents using the
document feeder. Align the documents against the top corner of the document feeder.
For information on how to copy mixed size originals using the document feeder, refer
to
document feeder. Align the documents against the top corner of the document feeder.
For information on how to copy mixed size originals using the document feeder, refer
to
1.
Before loading the documents
into the document feeder,
remove all staples and paper
clips.
into the document feeder,
remove all staples and paper
clips.
2.
Insert the documents neatly in
the document feeder face up,
aligning the left edge with the
document feeder tray. The first
page should be on top with the
headings towards the back or left of the machine.
the document feeder face up,
aligning the left edge with the
document feeder tray. The first
page should be on top with the
headings towards the back or left of the machine.
3.
Position the guides to just touch the edge of the documents.
When [Auto Paper Select] is selected in [Paper Supply], the machine automatically
selects an appropriate tray according to the document size. The selected tray, paper
size, and orientation in the selected tray are displayed on the screen.
NOTE: This feature is available when the machine finds an appropriate tray. If there is
no appropriate tray, manually select a tray or use the bypass tray. For more
information on tray selection, refer to
selects an appropriate tray according to the document size. The selected tray, paper
size, and orientation in the selected tray are displayed on the screen.
NOTE: This feature is available when the machine finds an appropriate tray. If there is
no appropriate tray, manually select a tray or use the bypass tray. For more
information on tray selection, refer to
Document Type (Weight)
Capacity
Lightweight (38-49 g/m
2
)
75 sheets
Plain (50-80 g/m
2
)
75 sheets
Heavyweight (81-128 g/m
2
)
50 sheets