Xanté 100-100621 Manuel D’Utilisation

21

1. From the ps_files folder on the

XANTÉ CD-ROM, copy dhcpoff.ps
to your c:\ drive.

2. Go to DOS (Command) Prompt.

3. Type copy dhcpoff.ps lpt1.

4. Power cycle the printer (turn off,

then back on).

5. Using a word processing application,

open setipsub.ps file from the
ps_files folder. Edit the file so it
contains the IP, Subnet, and Gateway
address you obtained from your

network administrator. Save the file
to your c:\ drive.

6. Go to DOS (Command) Prompt.

7. Type copy setipsub.ps lpt1.

8. Power cycle the printer again and

verify that the start-up page contains
your IP, Subnet, and Gateway
addresses.

9. Go to DOS (Command) Prompt to

ping the printer.

c:\ping (IP Address)

If you can ping the printer, go on
to step 10. If you cannot ping

your printer, contact your
Network Administrator.

10. Go to your Printer Properties (fig. 87)

and select the Port Tab (fig. 88).

Installation - Windows NT/2000/XP (continued)