Xanté 100-100621 Manuel D’Utilisation
9
3. Plug the other connector (either a
25-pin or a 9-pin female connector)
into the computer’s serial port.
into the computer’s serial port.
Ethernet Connection (PC and Mac)
10BaseT or
10/100BaseT
Unshielded
Twisted Pair
(UTP)
RJ-45
10/100BaseT
Unshielded
Twisted Pair
(UTP)
RJ-45
Fig. 23 Connect to Ethernet port.
Getting Started (continued)
1. Turn off your computer.
2. Connect one end of the CAT 5
Ethernet cable to your printer’s
Ethernet port.
Ethernet port.
3. Connect the cable’s other end to the
appropriate port on your network.
Connecting the Power Cable
Warning!
Be sure to plug the printer
into a properly grounded AC
outlet. Do not use and
extension cord. Use a surge
protected outlet to help
prevent power source
fluctuations from damaging
your printer.
into a properly grounded AC
outlet. Do not use and
extension cord. Use a surge
protected outlet to help
prevent power source
fluctuations from damaging
your printer.
Power Outlet
Power Cord
Power Source
Fig. 24 Connect power cord to printer.
Power Switch
Fig. 25 Press the power switch on.
Fig. 26 Start-up page prints (if enabled).
Media Types
Your XANTÉ printer supports plain
paper, transparencies, laser-quality labels,
thick paper stock, and envelopes; up to
16 to 24 lb. bond plain paper (60 - 90 g/
m
thick paper stock, and envelopes; up to
16 to 24 lb. bond plain paper (60 - 90 g/
m
2
); thick stock: 60 lb. cover or 90 lb.
index (163 g/m
2
).