SATO M-5900RV Manuel D’Utilisation
SATO M-5900RV Operator and Technical Reference Manual
Page 3-8
Section 3. Adjustments and Maintenance
PN 9001081
Rev. C
Rev. C
Replacing the Print Head
STEP
PROCEDURE
7.
While holding the print head firmly from the sides, carefully disconnect
the cable at the back of the print head. Set the damaged print head and
tear bar aside. Fig. Page 3-8
8.
Carefully attach the new print head to the cable connector.
CAUTION: This connector is keyed and should never be forced
together incorrectly. Be careful not to scratch the printing surface
together incorrectly. Be careful not to scratch the printing surface