Edimax Technology PS-3101 Manuel D’Utilisation

 

Once your PrintSir is connected to your Ethernet 

network, you can set it up for use with your networking 

software.  There are two methods you can use to do this 

easily: 

Please note that, you need install the IPX protocol 

before the following procedure, 

1.  On DOS environment or DOS box of Windows, use the 

“INSTALL” quick-installation program found on the 

<CD-ROM Drive>\DOSUTIL of CD-ROM included with 

the PrintSir. 

2.  On DOS environment or DOS box of Windows, use the 

“PSETUP” configuration program found on the included 

<CD-ROM Drive>\DOSUTIL, configure the PrintSir to 

use a particular file server. Then, use NetWare’s 

PCONSOLE program to create a NetWare print server 

and print queue with the appropriate names. 

The  INSTALL program included on the CD-ROM can 

be used to quickly set up the PrintSir for use on the 

NetWare environment. It can only be used to set up the 

PrintSir as Printer Server mode; it cannot be used to 

configure the PrintSir as Remote Printer mode. It handles 

changing the PrintSir’s internal settings, the creation of 

NetWare print server and print queue objects on the file 

server, and the assignment of the print server to the queue.  

Unless you need to configure the NetWare settings to 

conform to special requirements for your network, you can 

use the quick installation method.