Edimax Technology PS-3207UWg Manuel D’Utilisation

Page de 159
 
53 
6.2     Enable Print Server’s TCP/IP Support 
The default configuration of the print server is with TCP/IP 
support enabled. Anyway, you can configure the print 
server to enable TCP/IP support using the configuration 
program.  
6.3     Setup Print Server’s IP Address 
The print server must have a unique IP address in order to 
be recognized by the network. 
You can set up the IP address on the various Unix 
systems using any one of the following methods: 
1.  DHCP (Dynamic Host Configuration Protocol) 
2.  BOOTP (Bootstrap Protocol) 
The print server will use the last three methods to obtain 
its IP address automatically if its IP address is configured 
as Auto (0.0.0.0). 
6.3.1     DHCP 
There are many Unix systems that support DHCP protocol, 
and the procedures to configure the DHCP server 
database are different. This manual does not describe the 
DHCP server configuration on the Unix systems. It is 
highly recommended that the DHCP server should be 
located on the same network as the print server.