Manualsbrain.com
  1. Manuels
  2. Marques
  3. Epson
  4. MP-4000
  5. Manuel D’Utilisation

Epson MP-4000 Manuel D’Utilisation

Télécharger
Page de 36
User’s Manual 
24 
31. 
USB Interface 
 
31.1. 
Specification 
The port to the PC is a USB 2.0, which operates with the following characteristics: USB 2.0 
with drivers for Microsoft™ Windows 2000™, Windows 2003™, Windows XP™, Windows Vista™ 
or better. 
 
31.2. 
Cable connection 
 
 
1
2
3
4
1
2
3
4
Male
Type A
Male
Type B
 
 
Pino 
Sinal 
1 VBUS 
2 D 
- 
3 D+ 
4 GND 
 
 
32. 
Ethernet Interface 
 
32.1. 
Specification 
 
The port to the PC is an Ethernet, which operates with the standard characteristics of Ethernet 
10/100. To use the printer configure the IP address and net mask that the printer will use. If 
no value is configured, it will be used what is in the memory of the printer (configured by the 
Printer’s Menu). The standard configuration is 10.10.100.100 and the net mask is 0.0.0.0. 
To choose another IP configuration access the printer’s menu turning on the printer with the 
key PAPER FEED pressed. When it begins to print, release the button. In the end of the 
impression press PAPER FEED once, it will be printed the Configurations of the Printer. Press 
the key PAPER FEED again, to enter in the configuration of the printer. Than, press the key 
CUT to move forward in the printer’s menu, until the option IP address. Now it is only press 
the key PAPER FEED and chooses among one of the pre-programmed configurations in the 
printer, as follows: 
 
IP Address: 10.10.100.100   
Subnet mask: 0.0.0.0 
IP Address: 10.1.1.250 
 
Subnet mask: 255.0.0.0 
IP Address: 172.16.1.250   
Subnet mask: 255.255.0.0 
IP Address: 172.16.1.250   
Subnet mask: 255.240.0.0 
IP Address: 192.168.1.250   
Subnet mask: 255.255.255.0 
IP Address: 192.168.1.250   
Subnet mask: 255.255.0.0 
 
Choose the configuration and press the button CUT twice to conclude and leave the Printer’s 
Menu. 
 
 
ATTENTION! 
 
The communication port is fixed and it is configured with the number 9100. This value cannot 
be modified. To change the IP address and the net mask of the printer use the user's 
software. You can download the User's Software on Bematech website: 
 
www.bematech.com