Epson DFX-9000 Manuel D’Utilisation
138
Options and Consumables
5. Then tilt the pull tractor back until its rear latches click into
place over the printer’s rear mounting pins.
6. Close the printer’s top cover.
Using the pull tractor with the front tractor
If you are using labels or multi-part forms with more than seven
parts (including the original), you should use the pull tractor with
the printer’s built-in front tractor.
parts (including the original), you should use the pull tractor with
the printer’s built-in front tractor.
You can switch between the front and rear tractors at any time
when you are using the pull tractor. Just press the Front/Rear
button and then use the LF/FF Load button to feed the paper the
additional distance to the pull tractor. (Labels require special
handling. See “Using labels” on page 42 for details.)
when you are using the pull tractor. Just press the Front/Rear
button and then use the LF/FF Load button to feed the paper the
additional distance to the pull tractor. (Labels require special
handling. See “Using labels” on page 42 for details.)
To tear off documents, press the LF/FF Load button to advance
the paper to a point where it can be torn off.
the paper to a point where it can be torn off.
To use the pull tractor with the front tractor, follow these steps:
1. Turn on the printer and open the top cover.