Epson 4113114-06 Manuel D’Utilisation

Turn off the product, unplug the power cord, 
and check inside for any objects. Then, 
publish the disc again. If the same error 
occurs frequently, contact your dealer.

Turn off the product, unplug the power 
cable, and then check the inside of the 
drive. If the same error occurs frequently, 
contact your dealer.

The error could not be cleared even if it 
repeated itself for the retry number of times. 

Disc may have a problem. Replace the disc 
and resume job.
If there is a problem with the drive, change 
the drive with EPSON Total Disc Setup and 
resume the job. If the same error occurs 
frequently, contact your dealer.

An invalid disc error has occurred, such as 
the disc may not be blank or the disc does 
not have enough space. Or, the disc loaded 
in the stacker differs from the disc type you 
set in the EPSON Total Disc Setup Properties 
dialog box.

The error could not be cleared even if it 
repeated itself for the retry number of times.

Check that the disc is blank and not 
damaged.
Then, in the EPSON Total Disc Setup Properties 
dialog box, select the disc type that is the 
same as the discs loaded in the stacker. If 
you use the proper disc but the same error 
occurs frequently, contact your dealer.