Epson TM-P60 Manuel D’Utilisation

2-12

Setup

Rev. D

Note:

Msw 8-1:
When On is selected, this printer transmits power-off notice, power-on notice, and battery status to a host
PC. When off is selected, this printer doesn’t transmit these.

Msw 8-2:
When On is selected, the printer beeps the buzzer for 10 seconds when the battery status enters “battery
level is L“ or “battery level is S.“

Msw 8-3, 8-4, 8-5:
When On is selected, the buzzer beeps for 10 seconds for each situation. For information on printer errors
(Msw 8-5), see “3.1.1 Error Types” (page 3-1).

* “Time for auto power off”: When a printer isn’t received any data from host PC, and isn’t operated anything (ex.

opening the roll paper cover, pressing the FEED button) during the specified time, the printer turns off itself
automaticaly.

Note:

See “2.5.4 Adjusting Roll paper width” (page 2-13) also to adjust roll paper width.

Note:

When this printer connected with serial interface, the data length is always “8 bit.“ The handshake is
changed by a DIP switch; see “2.5.2 DIP switch” (page 2-10) for details.

Customize values

Function

Selectable value

Roll paper width

58mm or 60 mm (Default: 58mm)

Time for auto power off

Disable, or 1 ~ 60 minutes (Default: 20 minutes)

Print density

70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, 110%, 115%, 120%,
125%, 130%, (Default: 100%)

Serial communication

Function

Selectable value

Baud rate

9600 bps

19200 bps (default)

384000 bps

Parity

None (default)

Odd

Even