FARGO electronic S000256 Manuel D’Utilisation

RESTRICTED USE ONLY 

 

FARGO Electronics, Inc. 

CR-79 

A card dimension standard of 2.0625" L X 3.3125" W (+/-0.002" 
W, +/-0.005" L) or 52.400 X 84.150 mm.  

CR-80 

A card dimension standard of 2.125" X 3.370" (+/-0.002" W, +/-
0.005" L) or 53.975 X 85.598 mm.  

CR-90 

A card dimension standard of 2.375" X 3.625" (+/-0.002" W, +/-
0.005" L) or 60.325 X 92.075 mm. 

CR-100 

A card dimension standard of 2.625" X 3.875" (+/-0.002" W, +/-
0.005" L) or 66.675 X 98.425 mm. 

Cursor 

The marker in the LCD Display Window that indicates the active 
selection. 

Darkness 

A reference to color saturation.  

DB-9 

A 9 pin, D-shaped connector, typically used in serial port 
interfaces. 

DC Motor 

A Motor that works on DC with continuous motion.  

DC (Direct Current) 

Electronic flow that is unidirectional, flowing from the positive (+) 
to negative (-) of a power source.  

Default 

A setting or parameter that comes preset from the factory in 
Driver or firmware.  Performance parameters may be customized 
in the Driver, but can be reset to the factory values usually 
through the push of the default button.  The default values for the 
firmware are usually denoted on a label attached to the Printer. 

Defrag 

Abbreviation for defragmenting.  The process of reformatting data 
on a hard drive so that it uses space more efficiently. 

DIP switches (Dual 
In-line Package 
Switches) 

A small array of mechanical switches installed on the board that 
can be configured to change Printer operations including 
providing a variety of self-tests.  

Continued on the next page 

Persona

® C25 Card Printer User Guide (Rev. 4.0) 

158