Samsung ML-2010 Series Manuel D’Utilisation

I

NTRODUCTION

1.7

If you press the Cancel button in Ready mode, this LED is on 

and the Toner Save mode is enabled. 

If you press this button once again, this LED is off and the 

Toner Save mode is disabled. 

 

If the On Line/Error and Toner Save LEDs blink, your 

system has some problems.

To solve the problem, see “Troubleshooting Error Messages” 

In Ready mode, press and hold this button for about 2 

seconds until all LEDs blink slowly, and release. 

Press this button each time you load a sheet of paper in the 

Manual tray, when you select Manual Feed for Source 

from your software application.

For detailed information, see “Using the Manual Tray” on 

page 3.7. 

Press this button during printing. The On Line/Error LED 

blinks while the print job is cleared from both the printer 

and the computer, and then return to Ready mode. This 

may take some time depending on the size of the print job. 

In Manual Feed mode, you can’t cancel the print job by 

pressing this button.
For detailed information, see “Using the Manual Tray” on 

page 3.7. 

In Ready mode, press this button to turn the Toner Save 

mode on or off. 

For detailed information, see Software User’s Guide and 

page 4.5.