Ricoh DDP 70 Manuel D’Utilisation

An adhesive label is paper with a pressure-sensitive adhesive backing. Label stock 
consists of three components: the top or face sheet, the adhesive, and the liner or carrier 
sheet, sometimes referred to as the backing. Note the following points about label 
stock:

n

When exposed to the heat of the fuser, the label stock should not curl 
significantly, and the adhesive should remain stable so that it does not release any 
hazardous emissions. 

 for more information.

n

No adhesive should be exposed between the labels or along the edge of the label 
backing. 

n

Do not use labels with wrinkles, bubbles or any indication of delamination.

n

Fan the label stock before loading it into the tray.

n

Do not use label stock when printing in duplex mode.

n

Do not use label stock that has some of the labels removed.

n

Purchase minimum quantities of label stock to avoid the need to store it for longer 
than 6 months from the date of manufacture.

n

Test any label stock you are considering to verify its performance in your printer.