Ricoh 3580DNP Manuel D’Utilisation
Basics
48
2
Saving Energy
If not used for a certain period of time
after printing, the machine will enter
the Energy Saver or Auto Off mode to
reduce energy consumption.
after printing, the machine will enter
the Energy Saver or Auto Off mode to
reduce energy consumption.
❖ Energy Saver mode
The display goes off. Printing from
a computer is possible in this
mode.
To operate the machine, press the
Operation switch, or place origi-
nals on the exposure glass or in the
ADF.
To go back into the Energy Saver
mode, press the Operation switch.
a computer is possible in this
mode.
To operate the machine, press the
Operation switch, or place origi-
nals on the exposure glass or in the
ADF.
To go back into the Energy Saver
mode, press the Operation switch.
❖ Auto Off mode
The machine turns off automatical-
ly. To use it, turn the main switch on.
ly. To use it, turn the main switch on.
Note
❒ You can select which mode the ma-
chine enters after a specified peri-
o d h a s p a s s e d f o l l o w i n g j o b
completion. See p.156 “Energy
Saver Option”.
o d h a s p a s s e d f o l l o w i n g j o b
completion. See p.156 “Energy
Saver Option”.
❒ You can change the time the ma-
chine waits before Energy Saver or
Auto Off mode starts. See p.155
“Energy Saver Timer”.
Auto Off mode starts. See p.155
“Energy Saver Timer”.
Note
❒ The machine will not automatical-
ly enter the Energy Saver or Auto
Off mode in the following cases if:
• a warning message appears
• there is no ink
• originals or paper are jammed
• it is making master or printing
• it is loading original images into
Off mode in the following cases if:
• a warning message appears
• there is no ink
• originals or paper are jammed
• it is making master or printing
• it is loading original images into
memory
• there is no paper
• there is no master
• originals are left in the ADF
• there is no master
• originals are left in the ADF
• a cover is open
• you are making changes with
• you are making changes with
User Tools
• the user code entry screen is dis-
played
• the Data In indicator is lit or
blinking
• you are setting the mode on the
control panel
• it is stopping on the online
printing mode
• the stored file's screen is dis-
played
• the overlay mode with selecting
stored file is set.
Auto Off Timer
You can set the machine to turn itself
off at a specified time everyday.
Make the timer setting in User Tools.
See p.155 “Auto Off Timer”.
off at a specified time everyday.
Make the timer setting in User Tools.
See p.155 “Auto Off Timer”.
Note
❒ The machine will not automatical-
ly turn itself off if you are using it
at the set time.
at the set time.