Lexmark X925de Manuel D’Utilisation
In Windows 7 or earlier
1
Click
or click Start, and then click Run.
2
In the Start Search or Run dialog, type devmgmt.msc.
3
Press Enter or click OK.
b
Double
‑click Ports (COM & LPT) to expand the list of available ports.
c
Do either of the following:
•
Press and hold the COM port where you attached the serial cable to your computer (example: COM1).
•
Right
‑click the COM port where you attached the serial cable to your computer (example: COM1).
d
From the menu that appears, select Properties.
e
On the Port Settings tab, set the serial parameters to the same serial parameters set in the printer.
Check the serial heading of the menu settings page for the printer settings.
Check the serial heading of the menu settings page for the printer settings.
f
Click OK, and then close all the dialogs.
g
Print a test page to verify printer installation.
Additional printer setup
74