KYOCERA FS-820 Printer Manuel D’Utilisation
Connections
10
OPERATION GUIDE
Connecting to USB Interface
1
Connect the USB cable (not
included) to the USB Interface
Connector.
included) to the USB Interface
Connector.
NOTE:
Use a USB cable with a rectangular Type A plug and a square
Type B plug. The USB cable should be shielded and no longer than 5
meters (16 feet) long.
meters (16 feet) long.
2
Connect the other end of the USB cable to the computer’s USB interface
connector.
connector.
Connecting to Power
Install the printer close to an AC wall outlet. If an extension cord is used,
the total length of the power cord plus extension should be 5 meters (16
feet) or less.
the total length of the power cord plus extension should be 5 meters (16
feet) or less.
NOTE:
Ensure the printer’s power switch is off. Only use the power cord
supplied with the printer.
1
Connect the power cord to the
Power Cord Connector at the rear
of the printer.
Power Cord Connector at the rear
of the printer.
2
Connect the other end of the power cord to a power outlet.