Savin DSm627 Manuel D’Utilisation
Troubleshooting
108
5
Problem
Causes
Solutions
The main power in-
dicator continues
blinking and does
not turn off when
pressed.
dicator continues
blinking and does
not turn off when
pressed.
This occurs in the fol-
lowing cases:
lowing cases:
• The exposure
glass cover or the
ADF is open.
ADF is open.
• The machine is
communicating
with external
equipment.
with external
equipment.
• The hard disk is
active.
Close the exposure glass cover or ADF, and
check if the machine communicating with a
computer.
check if the machine communicating with a
computer.
Original images are
printed on the re-
verse side of the pa-
per.
printed on the re-
verse side of the pa-
per.
You may have load-
ed the paper incor-
rectly.
ed the paper incor-
rectly.
Load paper correctly. Load paper into Tray 1-4
with the print side up, and into the LCT or by-
pass tray with the print side down. See p.112
“Orientation-Fixed Paper or Two-Sided Paper”.
with the print side up, and into the LCT or by-
pass tray with the print side down. See p.112
“Orientation-Fixed Paper or Two-Sided Paper”.
Misfeeds occur fre-
quently.
quently.
The tray's side
guides may not be
locked.
guides may not be
locked.
Check the side guides are locked. See p.122
“Changing the Paper Size”.
“Changing the Paper Size”.
The tray's end guide
may not be set prop-
erly.
may not be set prop-
erly.
Check the end guide is set properly. See p.122
“Changing the Paper Size”.
“Changing the Paper Size”.
You may have load-
ed paper of a size not
shown on the paper
size selector.
ed paper of a size not
shown on the paper
size selector.
When using paper of a size that cannot be de-
tected automatically, use Tray Paper Settings to
set the paper size. See p.55 “Tray Paper Size:
Tray 1–4” and p.163 “Copy Paper”.
tected automatically, use Tray Paper Settings to
set the paper size. See p.55 “Tray Paper Size:
Tray 1–4” and p.163 “Copy Paper”.
An error message re-
mains, even if misfed
paper is removed.
mains, even if misfed
paper is removed.
When a misfeed mes-
sage appears, it re-
mains until you open
and close the cover,
as required.
sage appears, it re-
mains until you open
and close the cover,
as required.
Clear misfed paper, and then open and close the
front cover. See p.116 “
front cover. See p.116 “
x Clearing Misfeeds”.
An error message re-
mains, even if con-
sumables are
replaced and/or mis-
fed paper is re-
moved.
mains, even if con-
sumables are
replaced and/or mis-
fed paper is re-
moved.
This may occur if the
HDD is not installed.
HDD is not installed.
Press the
{{{{Start}}}} key.
Cannot print in du-
plex mode.
plex mode.
You cannot use pa-
per in the bypass tray
for duplex printing.
per in the bypass tray
for duplex printing.
For duplex printing, select Tray 1-4 in copier
mode or with the printer driver.
mode or with the printer driver.
[1 Sided Copy]
is se-
lected for Paper
Type: Tray 1-4.
Type: Tray 1-4.
Select [2 Sided Copy] for Paper Type: Tray 1-4. See
p.56 “Paper Type: Tray 1–4”
p.56 “Paper Type: Tray 1–4”
You forgot your key
operator code
operator code
—
Contact your service representative.
RussianC3_ENgsg-F_FM.book Page 108 Monday, June 16, 2003 6:48 PM