OKI C3520 Manuel D’Utilisation

Operation > 76

When the Enter Fax no. screen is open, press the Start 
button after entering a Fax no. to start sending the Fax.

Or you can return to the Fax Stand-by screen by pressing 
the Enter key after entering a Fax no., and start sending 
the Fax by pressing the Start button.

When you complete entering a Fax no. the Continue 
screen appears.

In the Continue screen, move the cursor to Continue and 
press the Enter key to return to the Enter Fax no. screen. 

In the Continue screen, move the cursor to Done and 
press the Enter key to return to the Fax Stand-by screen.

When you return to the Fax Stand-by screen after 
selecting a Fax no., you will see Confirm below the Fax 
no. and the cursor on Confirm.

Select a Fax no. in the Fax Stand-by screen and add it.

When the MFP is in Automatic Fax Receive, the screen display 
appears only in the Idle state. The display does not appear during 
operation. If Fax receiving fails, the error display message 
remains until you press the Stop button.
When Automatic Fax Receive is functioning correctly: 

When ringing - Receiving Start is displayed on screen

While it is receiving a Fax - Fax Receiving, sender's Fax 
no., and the number of received pages are displayed until 
the reception of data from all pages is completed.

Upon completion of Fax Receiving, sender's Fax no., the 
total number of received pages, and Receiving OK are 
displayed for 3 seconds, and the display changes to the 
Mode Selection screen.