OKI 110 Manuel D’Utilisation

100 - C110 User’s Guide

Not all pages 
print.

The Cancel key was 
pressed.

Make sure no one pressed the Cancel 
key while your job was printing.

The tray is empty.

Check that the trays are loaded with 
media, in place, and secure.

A document is printed with an 
overlay file which has been 
created by an unsuitable 
printer driver.

Print the overlay file using a suitable 
printer driver.

Printer 
resets or 
turns off 
frequently.

The power cord is not 
correctly plugged into the 
outlet.

Turn off the printer, confirm that the 
power cord is correctly plugged into the 
outlet, and then turn on the printer.

A system error occurred.

Contact Technical Support with the 
error information.

With

 

N-up on 

multiple 
prints, the 
output is 
incorrect.

Both the driver and the 
application have been set for 
collation.

For N-up on multiple prints, choose 
Collate only in the driver’s Basic Tab. 
Do not set collation in the application.

You hear 
unusual 
noises.

The printer is not level.

Put the printer on a flat, hard, level 
surface.

There is a foreign object 
stuck inside the printer.

Turn off the printer and remove the 
object. If you cannot remove it, contact 
Technical Support. 

Media is 
wrinkled.

The media is moist from 
humidity or having water 
spilled on it. 

Remove the moist media and replace it 
with new, dry media. 

The media feed roller or fuser 
unit is defective.

Check them for damage. If necessary, 
contact Technical Support with the 
error information.

Unsupported media (wrong 
size, thickness, type, etc.) is 
being used.

See “Print Media” on page 30