OKI 2426 Manuel D’Utilisation
Executive Series 2426 Printer Family User’s Guide
Troubleshooting • 545
Parallel Interface Problems
Cannot configure for parallel connection
Windows only
Possible cause
Remedy
The computer does
not support
bi-directional parallel
interface.
not support
bi-directional parallel
interface.
There is no solution for this problem.
You must use a computer that supports a bi-directional
parallel interface.
You must use a computer that supports a bi-directional
parallel interface.
Parallel cable does
not meet
specifications.
not meet
specifications.
Use a bi-directional parallel cable that meets the
IEEE 1284–1994 specifications.
IEEE 1284–1994 specifications.
The interface is
disabled.
disabled.
Check that the parallel interface is set to enable.
Configuration
procedure was not
correctly followed or
cancelled.
procedure was not
correctly followed or
cancelled.
Configure again from the beginning.
Parallel cable is
disconnected or
faulty.
disconnected or
faulty.
Reconnect or try another cable.
A converter, buffer or
extension cable is
being used.
extension cable is
being used.
Test by connecting printer and computer directly.